|
Bronze Valves
Bronze IBR Certified Valves & cocks
Bajaj Bronze Fusible Plug IBR Certified
Single Piece / Two Piece Design
Screwed Male BSP Taper End
Max. B.O.P. 100 psig. & 250 psig at 220oC Temp.
Hyd. Tested 500 psig.
Size 15 mm to 50 mm.
Bajaj Bronze Accessible Feed Check Valve IBR Certified
Straight / Curved Inlet Angle Pattern Bolted Bonned
SS (AISI 410) Trim Parts, Flanged Ends to BS: 10 Table 'H'
Hand Wheel Operated
Max. W.P. 250 psig. at 220oC Temp.
Hyd. Tested 500 psig.
Size 20 mm to 50 mm.
Bajaj Bronze Spring Loaded Metallic Diaphragm Type Pressure Reducing Valve IBR Certified
Screwed Female Ends spring Available
Range Pr. 5/60, 20/80 and 40/125 on Down Steam
Max. Inlet Pr. 250 psig. at 220oC Temp.
Hyd. Tested 500 psig.
Size 15 mm to 50 mm.
Bajaj Bronze Parallel Slide Blow Off Valve IBR Certified
With S.S. / Monal Working Parts / Rack & Pinion operated Heav Pattern. BS: 10 Table 'H'
Max. BOP 250 psig. at 220oC Temp.
Hyd. Tested 500 psig.
Size 25 mm to 50 mm.
Bajaj Bronze Controllable Feed Check Valve IBR Certified
Outsde Screw & Yoke type, with S.S. (AISI-410)
Trim Parts, Bolted Bonnet, S.S. (AISI-410) STem
Screwed / Flanged Ends.
Max. W.P. 250 psig. at 220oC Temp.
Hyd. Tested 500 psig.
Size 20 mm to 50 mm.
Bajaj Bronze Pressure Gauge Cock IBR Certified
Fitted with Pressure Gauge Coupling Nut and Tail Pipe, Screwed BSP, Female Ends.
Max. W.P. 250 psig. at 220oC Temp.
Hyd. Tested 500 psig.
Size 100 mm to 15 mm.
Bajaj Bronze Inspectors Test Gauge Cock IBR Certified
With bend 3/4 BSW
Inspector Gauge Connection
Max. W.P. 250 psig. at 220oC Temp.
Hyd. Tested 500 psig.
Size 10 mm to 15 mm.
|
